toyota tools automotive toyota tools bmw tool -- mmk4mkt

Toyota Bonus Set 37.99

ZDMAK SPECIAL DEAL
Headbolt tool and Valve tools...
First Item: Valve tool designed to allow for easy valve adjustment on most Toyota overhead cam engines using spacer shims for valve adjustment. In operation, the tip of the pliers pushes between the spacer shim and the camshaft as the pliers are squeezed close. This action moves the shim and its valve lifter down from the camshaft lobe. In the down position the separate wedge tool is placed between the valve lifter ledge and the camshaft. This wedge tool then maintains a gap between the shim and the camshaft as the pliers are removed. The spacer shim can then be removed through this gap and replaced with one of the correct thickness. Works especially well with 3S FE and 3S GELC Toyota DOHC.Toyota number 09248 55040For Camry, Sienna, Avalon, Solara, Supra, 4Runner, MR2, Previa, Paseo, Tacoma, Tercel, T100, Celica.Packaged as shown with pliers and spacer wedge. Does not work with Land Cruiser 1993 1997 and Lexus LX400 1994 199

PLUS * Toyota Headbolt Tool
12 Point (Triple Square) Socket.
This item is called XZN (style) and is very hard to find. 1/2 Drive Socket is 100mm long, for easy access to hard to reach headbolts.

Toyota Crank Seal Installer 41.50

For the proper and easy installation of oil sealon pulley side of the crankshaft.Applicable: Most 4 & 6 cylinder Toyota engines

Toyota Transmission Tool 19.50

Puller used for the proper extraction of front counter shaft bearing.Applicable: Toyota transmission L52 81 83 5speed /4WD

Toyota Transmission Tool 28.00

Puller used for the proper extraction of rear counter shaft bearing and 5th gear. Applicable: Toyota transmission L52 81 83 5speed 4WD.

Toyota / Asian Oil Seal Bonus Kit 159.50

Universal Asian Oil Seal Installation Bonus Kit
This special kit was designed for the proper installation of crank shaft oil seals, situated within confined areas on most 4, 6 and 8 cyl Toyota, Lexus, Nissan, Mitsubishi, Mazda and Infiniti.Application includes camshaft oil seal installation of Toyota Lexus 2.5L, 2.8L, 3.0L, 3.4L, 4.0L & 4.3L The stepbolts screw into the cam or crankshaft end. The press nut and washer allows for an even pressing force, seating the oil seal into the engine case with ease.

See tool TOY100 for 4 cylinder Asian camshaft oil seal installation. Honda Acura, see tool HO100, HO105, HO115, and HO115 WB.

Toyota Valve Adjustment Tool 19.99

This tool has been designed to allow for easy valve adjustment on most Toyota overhead cam engines using spacer shims for valve adjustment. In operation, the tip of the pliers pushes between the spacer shim and the camshaft as the pliers are squeezed close. This action moves the shim and its valve lifter down from the camshaft lobe.In the down position the separate wedge tool is placed between the valve lifter ledge and the camshaft. This wedge tool then maintains a gap between the shim and the camshaft as the pliers are removed. The spacer shim can then be removed through this gap and replaced with one of the correct thickness.
Works especially well with3S FE and 3S GELC Toyota DOHC.
Toyota number 09248 55040
For Camry, Sienna, Avalon, Solara, Supra, 4Runner, MR2, Previa, Paseo, Tacoma, Tercel, T100, Celica.
Packaged as shown with pliers and spacer wedge.Does not work with Land Cruiser 1993 1997 and Lexus LX400 1994 1997

Toyota Master Set 99.99

ZDMAK THREE ITEM MASTER KIT FOR TOYOTA
Cam Tool Plus Headbolt tool Plus Valve Tool
You can read about all three of these items on this page (above). This set includes item numbers TOY4VT, plus TOYHB and 2705.

Toyota Cam Installer Set 49.50

Installer Kit used for proper installation of cam shaft seal on transverse mounted Japanese engines,placing cam shaft within close proximity to shock tower.Due to this confined space, it is difficult to replace cam seal using conventional methods.Applicable: Toyota Engine 3AC, 3EE, 3S FE, 3S GE, 4AC, 4A GE, 5S FE, 7M GE, 7M GTE.Mazda B6, BP. Nissan engine VG30.

Toyota Locknut Tool 19.99

Toyota front wheel bearing design change requires a new procedure to remove the locknut: The free wheel hub assembly locknut is on the inside, so the hub must be removed to gain access. This wrench has a four pin design accommodates the four holes in each locknut, which prevents slippage under high torquing requirements. Works on 1995 and newer Tacoma, and 1996 and newer T100 and 4Runner.

Set 2 Power Lifter Pickup Tools 38.00
Set of 2 * Pick up Tools
One 19 inch long with lift cap 1.5lbs.
One 2 feet long with 3 lbs. capacity.

Please note: picture is for reference only.

Tools are also sold separately below.

read more:

Push Pin Pliers Set of 2 39.50

PUSH PIN REMOVAL PLIERS SETPush pin pliers are designed to remove plastic push pins onHonda, Toyota, GM, Saturn and many other vehicles.Special ground tips remove the pins without damage.Pliers can also be used to remove U Joint circle clips.One tool with a 75 degree offset head to allow push pin removal in tightareas. These tools will save you time and headaches.

Toyota Lexus Cam Tool Kit 58.00

Cam Seal Installer w/ 10 & 12mm X 12.5 Threaded Cam Bolts Features and Benefits: This tool is designed to easily install the cam seals in 4 & 6 cylinder engines for Mazda, Nissan & Toyota/ Lexus engines that have 10 & 12mm x 1.25 cam bolts. These engines are mounted transversely which puts the camshaft end in very close proximity to the shock tower making replacement of the cam seal extremely difficult using conventional methods. Simply screw the threaded rod into the cam end, slide the body over the rod against the seal and press in the seal using the nut provided. This tool comes in black finish.

Insulated Driver Set Made in Germany 48.50
Professional Quality Insulated Tool Set.Individually Tested Tools Certified To 1000 Volts.Tools Meet The Following Safety Specifications:ASTM F 1505 01 IEC 900 VDE 0682/Part 201 ISO 9001Certified Tools Meet OSHA Definition For Insulated Tool Requirements.Quality Tools Made In GermanyCVM Tool Steel Hardened To Average 58/60RC. 10 Piece Insulated Screwdrivers
Set Includes:Slotted: 2.0, 2.5, 3.0, 3.5, 4.5, 6.5 Phillips: 0, 1, 2, 3
read more:

Oil Seal Installation Bonus Kit 159.50

Two Pickup Tools 9.99
RETRIEVER SET
Two tools for Picking up bolts, screws, washers, etc. from confined areas
Indispensible for home & workshop. Set includes:
RETRIEVER CLAW
Flexible shaft reaches confined areas, with durable holding claw
MAGNETIC RETRIEVER
With Flexible shaft also for reaching into tight spots, plus strong, durable magnet.
Both tools are 24 inches in length overall.
Picture shows both tools plus an exploded view of the claw end.
read more:

BMW Self-Parking Car System Video
So what's the difference between this auto parking system and various others that have been previewed the past few years like the Toyota Prius one? Well, BMW's doesn't kneed the driver to be in the car.
read more:

Klein Tool Pouch 46.95
Klein Tool Pouch
Leather, 8 Pockets, Thong, Snap, Tunnel Loop
Leather construction. Provides space for an large number of tools. Riveted to assure long life.
Klein Tools product line includes virtually every major type of hand tool used in construction, electronics, mining, and general industry in addition to the electrical and telecommunications fields.Klein Tools also supplies a line of occupational protective equipment. Klein remains dedicated to supplying only the finest quality products.Made for professional users, Klein tools are available through stocking distributors worldwide.
read more:

Set 4 Measuring Tools 00
Item1685/C7DescriptionAssortment of 7 measuring and marking tools, in wooden case
read more:

Set of Two Terminal Tools 29.50

Special Electrical Tools Terminal Tools Set of 2
Special Electrical Tool Terminal Tool Eliminate Damaged wires and Terminals. Wire Terminal tools are designed to remove wires from terminals without damage to either. The prongs depress the "barbs" on conventional terminals.

Saab Set 3 Clutch Tools 13.99

Set of 3 Clutch Alignment Tools Covers a wide variety of Saab Applications.
The clutch tools in this kit are extremely durable long lasting and inexpensive.
These tools can be used over and over again.
A must for clutch repair shop, clutch specialist, transmission repair shops,
automotive stores, school shop classes, clutch resellers,
foreign and domestic repair shops.

Set 3 Porsche Clutch Tools 13.99

Set of 3
Porsche Clutch Alignment Tools
Covers a BIG variety of Porsche Applications.
The clutch tools in this kit are extremely durable long lasting and inexpensive.
These tools can be used over and over again.
A must for clutch repair shop, clutch specialist, transmission repair shops,
automotive stores, school shop classes, clutch resellers,
foreign and domestic repair shops.

Set 3 BMW Clutch Tools 13.99

Set of 3
BMW Clutch Alignment Tools
Covers a BIG variety of BMW Applications.
The clutch tools in this kit are extremely durable long lasting and inexpensive.
These tools can be used over and over again.
A must for clutch repair shop, clutch specialist, transmission repair shops,
automotive stores, school shop classes, clutch resellers,
foreign and domestic repair shops.
Readmore about this 3 piece Click Here

Two Pickup Tools 5.50

RETRIEVER SET
Two tools for Picking up bolts, screws, washers, etc. from confined areas
Indispensible for home & workshop. Set includes:
RETRIEVER CLAW
Flexible shaft reaches confined areas, with durable holding claw
MAGNETIC RETRIEVER
With Flexible shaft also for reaching into tight spots, plus strong, durable magnet.
Both tools are 24 inches in length overall.
Picture shows both tools plus an exploded view of the claw end.

More Tools 0.00

Be sure to look in the VOLKSWAGEN section for more tools. Plus you will find some sweet deals in the ZDMAK SPECIALS section, and in the TODAYS SPECIALS section. If you need something quickly please email or call. Expedited or Air shipments should be called in as early in the day as possible. I will do all I can to get you the tools you need or help you with your tool search.

Set 3 Audi Clutch Tools 13.99

Set of 3
Audi Clutch Alignment Tools
Covers a BIG variety of Audi (and many Volkswagen Applications).
The clutch tools in this kit are extremely durable long lasting and inexpensive.
These tools can be used over and over again.
A must for clutch repair shop, clutch specialist, transmission repair shops,
automotive stores, school shop classes, clutch resellers,
foreign and domestic repair shops.
Readmore about this 3 piece Click Here

Set 7 Marking and Measuring Tools 00
Item1685/C7DescriptionAssortment of 7 measuring and marking tools, in wooden case
read more:

Set of 6 Exhaust Tools 00
Item5965VA8DescriptionAssortment of 6 exhaust system tools
read more:

Shortie * Drain Plugs 3/8 Drive Tools 0.00

Serious Stubby Short Pattern 3/8 drive Hex Allen Drain Plug Sockets. Very Hard to find in this short version in a 3/8 drive. These tools will work well in a tight spot.
The larger 1/2 drive tools are too big for some applications.
Sizes available 17mm, 14mm, 13mm, 12mm, 10mm and 8mm.
Sold each or in a set of 6.

M8, M10 and M12 Triple Square Set 3 39.99

Super Set!
Three Headbolt Tools Triple Square 12 Point (XZN) Sockets M8, M10 and M12
Sturdy 1/2 Drive Tools used for a wide variety of applications including headbolts.
Excellent for working on German vehicles.
Each tool is 5 1/2 inches overall and the shaft is 4 inches long!
Zdmak Special Set of 3 big 1/2 drive Tools!

Extractor Tool Kabelex 00

Ejection extractor tools for contacts MAN/Volvo, DaimlerChrysler, BMW, Porsche, Volkswagen, Audi: tools for flat plug in sockets with asymmetrically positioned latches in terminals with single release, with two release channels,etc..
ClickHere for More Kabelex information. Extractor tools for soldered contacts, for Micro Timer I, cable extractor tools for Micro Timer II, III, Pit Pod contacts, Maxi Power Timer , SLK contactsetc...

Ferrari Tools 00

If you would like a current sales flier on Beta Products and Tools please email with your complete mailing address and literature will be sent to you directly.
email: sales@zdmak.com

MoreBeta Ferrari Tools Here

Roll Up Pouch 6.99
Roll Up Pouch Only
DOES NOT INCLUDE TOOLS
PICTURE IS FOR REFERENCE ONLY
12 pocket pouch holds a variety of tools.
Great for auto and motorcycle use.
Made of heavy duty nylon fabric for long life.
Long web strap with velcro fastener keeps pouch closed tightly when not in use.
read more:

Cats Paw Capped Screwdrivers 43.50
6 Pc. Cats Paw Capped Screwdriver Set
Capped so you can strike with a hammer.
Phillips 1, 2, 3, Slotted 7/32", 1/4", 5/16"Blade extends throughout handle and is fully heat treatedTwo composite handle designed for user comfort and reduced hand fatigueCapped end Handle allows the user to strike the screwdriver without damaging the handleHex bolster for extra turning power.
Mayhew Tools has been manufacturing Punches and Chisels in the Western Massachusetts town of Shelburne Falls since 1856. As the oldest Punch and Chisel manufacturer in the U.S., Mayhew Tools has grown from a small tool house to the leader of the industry. Their product line has also grown to include an assortment of Wrecking and Prying Bars, Masonry Tools, Handguarded Tools, Screwdriver Type Pry Bars, Brass Punches, Pilot Punches, All Steel Wood Chisels, Nail Sets, Carbon Scrapers and Hollow Punches.
read more:

Best Seller ! Radio Tools Set 24.99

This is one of the best sets on the market. This is a Master Set for BMW Mercedes Porsche VW Audi and DIN. Included is a total of 3 different sets Volkswagen Audi, two different tools for BMWand a set for Mercedes Porsche and a DIN Ford set. The VW Tools (4) Number T10057Audi A4, A6, A8 and New Beetle For Concert, Symphony I and Symphony II stereos. Also for Nav units in Trunk and for CD changers in Glove box. If you have 4 slots VW AUDI this is the 4 keys you need) Plus you get Number VW 3316 (2) Radio Removal Tools New Body Style Passat Jetta Golf . You will get virtually full coverage forVolkswagen Audi when you buy this master set. The BMW Radio Removal Tools areone Pentagon shaped tool with a 3 5/8 inches overall length. Applicable: Most BMWs. This Five sided driver is used to release anti theft radio mounts.You will also get the special rare small allen tool for BMW (upper left) Fornewer BMW E38 & E39 7 SERIES Plus Mercedes most coverage for newer and oldervehicles, especially 1992 and newer 129, 140, 163, 202 & 210 PLUS Range Rover with Becker Nav System.The MB Tools also work on Porsche. Appl: Turbo GT, GT2, GT3, Boxster, Cayenne 911, 996 , 987, Carrera etc. Same as Porsche ref: 000 721 957 01

Dogleg and 8mm Hex Set 29.50

Hex Tools (2) Dogleg Plus Regular 8mm Allen
Set of Two Tools Sturdy 1/2 Drive Dogleg (offset) 8mm Allen SocketApplicable: M116, 117
Overall length of the tool is 4 1/4 inches.
Tool used for R&R of cylinder head bolts.
Similar to Mercedes number 000 589 3407 00.
Plus 8mm (straight) standard Hex 1/2 drive.
Excellent tools for working on Mercedes and other German vehicles.

Junior Tool Bag 27.99
Bucket Boss Brand GateMouth Jr. Tool Bags

Ideal for cordless power tools and accessories

Super wide "gate mouth" design

Size: 13" x 9" x 8"Product Description
From the Manufacturer
Just the right size for power tools. This bag is engineeredto do what the plastic or metal case provided with small power toolscant carry a cordless tool, battery charger, spare battery and a complete setof hand tools and accessories specific to the job. Foam padded sides and bottomprotect walls from dings, floors and counters from scratches. Interior andexterior tool pockets of various sizes will fit most tool combinations. RickDuckwear color scheme. A better way to carry small power tools, it also makes afine general tool bag. 6 exterior, 17 interior pockets. 13 in. L x 9 in. W x 8in. H.
read more:

Toyota Lexus B90 Only 278.00

Call or Email with any questions.

Headbolt Tool Set 2 29.50

These are the tools you are looking for!
Plus they are on sale!
Headbolt Tools 1/2 Drive
Used to remove and install cylinder headbolts.
Volkswagen Audi
Long pattern for deep located screws. Drive size is 1/2"Dont be stuck using the wrong tools. Please read: The T10070 is the correct current VW Audi number for this new style tool.The old tool number was 3452 and is now discontinued.Many Audi Headbolts have switched to the new pattern.This will fit into the new special screw profile.The German Tool Books call this new style a Polydrive.

Plus you get Headbolt Tool Triple Square 12 Point (XZN) Socket M10Sturdy 1/2 Drive Tools used for a wide variety of applications including headbolts.Excellent for working on German vehicles.
This XZN tool is 5 1/2 inches long and the shaft is 4 inches.
Super set for removing & installing cylinder headbolts on both early and late model 1.8T and 2.0L gas engines. You will get both tools with this purchase.

Audi VW Headbolt Tool Set 2 29.50

These are the tools you are looking for!VW AUDI Headbolt Tools 1/2 Drive
Used to remove and install cylinder headbolts.
Volkswagen Audi
Long pattern for deep located screws. Drive size is 1/2"Dont be stuck using the wrong tools. Please read: The T10070 is the correct current VW Audi number for this new style tool.The old tool number was 3452 and is now discontinued.Many Audi Headbolts have switched to the new pattern.This will fit into the new special screw profile.The German Tool Books call this new style a Polydrive.

Plus you get Headbolt Tool Triple Square 12 Point (XZN) Socket M10Sturdy 1/2 Drive Tools used for a wide variety of applications including headbolts.Excellent for working on German vehicles.
This XZN tool is 5 1/2 inches long and the shaft is 4 inches.
Super set for removing & installing cylinder headbolts on both early and late model 1.8T and 2.0L gas engines. You will get both tools with this purchase.

Set of 7 Suspension Tools 00
Item5965VA2DescriptionAssortment of 7 suspension tools
read more:

Cotton Wrench Roll Up 22.50

Tool Roll Wrench Roll Up Fits 3/8" to 1 1/4" or 6mm to 32mm wrenches Brass grommets to hang in shop Rolls up and ties for easy transport. Constructed from cordura and heavy duty nylon, the Wrench Roll features 14 pockets of different widths and depths to hold various hand tools like wrenches, ratchets, and extensions, and protect them against impact damage and clanging. When rolled closed, the Wrench Roll is secured with two ties that permit the user to make his Wrench Roll as small or large as his tools will allow. Can be stored inside larger tool bags or boxes. A very useful organization and storage pouch for your tools. This wrench roll up is designed specifically for wrenches, ratchets, ratchet extensions, and other relatively long and thin tools. Tools like pliers will not fit. This item is 27" wide side to side, 10" tall at the left, and 22" tall at the right. The smallest pocket on the left is 3" deep, and the largest pocket on the right is 14" deep.

Terminal Tool Wire Remover 13.99
Special Electrical Tools Terminal Tool Eliminate Damaged wires and Terminals.
Wire Terminal tools are designed to remove wires from terminals without damage to either. The prongs depress the "barbs" on conventional terminals. See set of 2 below.
read more:

Canvas Tool Bag 22.25
Canvas Tool Bag
Features & Benefits:
Big enough to hold and keep all your necessary tools.
Internal metal frame holds bag wide open.
10 Outside pockets to organizes tools.
14 Inside pockets for accessories.
Built of rugged 20oz. canvas material with hard bottom for better stability.
12 inch Long x 10 inch Wide x 11 inch Height
read more:

Brake Caliper Rewind Set 47.99
U.S./EURO/ASIAN/4WD VEHICLES
Disc Brake Pad & Caliper Service Tool Kit
Includes 8 adapters Magnetic socket adapter.
For brake assemblies
For rotating pistons back into caliper to provide clearance for new pads
Prevents damage to the piston and bootDesigned for use with Mercedes, BMW, Volkswagen, GM, Audi, Ford,Honda, Subaru, Mazda, Nissan, Mitsubishi, Toyota, Land Rover and 4 wheel drive vehicles.Blow molded carryingcase for easy storage.
read more:

RETAINER TOOLS 79.00

FACTORY TOOLS USED WITH ENGINE SUPPORT 10 222 WHEN REMOVING AND INSTALLING THE GEARBOX ON 16 VALVE ENGINES.

Super Tools for BMW 29.95

You will receive 4 all four tools with this set.
Included are 3 flex shaft (female) nut drivers 6, 7, and 8mm
Plus a very handy 1/4 inch (male) Driver.

Set of 10 Spark Plug Tools 00
Item5965VA7DescriptionAssortment of 10 spark plug tools
read more:

Set of 6 Steering / Transmission Tools 00
Item5965VA1DescriptionAssortment of 11 steering and transmission tools
read more:

PRESS TOOLS 139.99

PRESS TOOLS USED FOR INSTALLATION OF THE BALL BEARING FOR DRIVE SHAFT ON MANUAL TRANSMISSIONS 012 AND 01A

Motorcycle Roll Up (Large) 33.99
Tool Roll Up
Great for Bikes or cars.
(Motorcycle people especially like this roll up).
Made of 1000 denier, urethane coated cordura to help keep your tools dry, organized and protected. Extra long nylon straps with sleek, quick release buckles keep everything wrapped up tight (a 2 1/2' diameter when empty). Heavy duty elastic retainer to help keep your tools in their place. Three large Velcro sealed pouches in the cover flap have easy open pull tabs for access to shop rags, jumper cables or sockets. This organizer is designed for use inside a tool pouch or saddle bag. Three sizes to choose from. Large is 13" wide and will fit most 12" crescent wrenches. Medium is 11" wide and will fit in most wide glide tool pouches. Small is 9" wide and will fit in most narrow glide pouches. Available in black, tools not included.

Please note: This is size LARGE.
read more:

You Searched for

toyota tools

Trade Links With ZDMAK